In this section you will see some of the joints used in selected furniture, and door parts also done in my wood shop. You'll also notice I stamp my name with pride on all custom pieces such as this dovetail drawer pictured below
Shown below are rosettes, a raised panel drawer front, millwork for an exterior entrance door, mortice and tenon.
Shown below are how some of the above look like when put together
Milling styles for cabinet doors on my shaper.
below I've just milled some door parts. You can see how I build this exterior door in the "phase 2" section at the bottom of my first page
You cab also see this entertainment unit built in the phase 2 section also. I turned the spindles and the entire cabinet is of oak
^^^
Here's a close up of a mortice and tennon joint.
^^^^
Here's some finish work on a job I'm currently doing. This job can be viewed under "phase 2" from my index page
This door I built is of solid Ash, and my wife and I also did the leaded glass.
^^^^^^^^^^
...
..